LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Power Steering System) >> Power Steering Gear >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen outer socket lock nut, and then remove outer socket from inner socket.
  2. Remove boot clamp, and then remove boot from inner socket.
    CAUTION: Do not damage inner socket and gear housing assembly when removing boot. Inner socket and gear housing assembly must be replaced if inner socket and gear housing assembly are damaged because it may allow foreign material to enter.
  3. Remove inner socket from rack assembly while holding the flat portion of the rack next to the inner socket using a suitable tool.
  4. Measure adjusting screw height "H", and loosen lock nut (2).
  5. Remove adjusting screw (1), retainer (3) and spring (4) from gear housing assembly (5).
    Fig 1: Identifying Adjusting Screw Height H And Loosen Lock Nut
    G04927415
scientia non olet · About LEMON Manuals