LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1556 (Engine Control System) >> DTC P1122: Electric Throttle Control Function >> Component Inspection >> Throttle Control Motor

Throttle Control Motor

WARNING: This page is about a different car, the 2005 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect electric throttle control actuator harness connector.
  2. Check resistance between terminals 5 and 6.

    Resistance: Approximately 1 -15 Ω [at 25 °C (77°F)] 

    Fig 1: Checking Resistance Between Throttle Control Motor Connector Terminals 5 And 6
    G02432055Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, replace electric throttle control actuator and go to next step.
  4. Perform THROTTLE VALVE CLOSED POSITION LEARNING .
  5. Perform IDLE AIR VOLUME LEARNING .