LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1728 (Seats (Coupe)) >> Automatic Drive Positioner >> Terminals and Reference Values for Automatic Drive Positioner Control Unit

Terminals and Reference Values for Automatic Drive Positioner Control Unit

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
AUTOMATIC DRIVE POSITIONER CONTROL UNIT REFERENCE TABLE

TERMINAL WIRE COLOR ITEM CONDITION VOLTAGE (V) (Approx.)
1 Y/G Tilt switch UPWARD signal Tilt switch turned to upward 0
Other than above 5
7 OR/L Tilt sensor signal Tilt switch operated (up ~ down) 2 ~ 4
Other than above 0
10 R/L UART LINE (TX) Memory switch 1 or 2 operated
G04077620Courtesy of NISSAN MOTOR CO., U.S.A.
11 P/L Telescopic switch FORWARD signal Telescopic switch turned to forward 0
Other than above 5
17 LG/B Tilt switch DOWNWARD signal Tilt switch turned to downward 0
Other than above 5
23 R/Y Telescopic sensor signal Telescopic switch operated (backward ~ forward) 2 ~ 4
Other than above 0
26 R/G UART LINE (RX) Memory switch 1 or 2 operated
G04077618Courtesy of NISSAN MOTOR CO., U.S.A.
27 G/W Telescopic switch BACKWARD signal Telescopic switch turned to backward 0
Other than above 5
33 W/L Sensor power supply Tilt or telescopic switch operated 5
Other than above 0
34 GY(1)
Y/R(2)
Power source (Fuse) - Battery voltage
35 G/Y Tilt motor UPWARD signal Tilt switch turned to upward Battery voltage
Other than above 0
36 R Telescopic motor FORWARD signal Telescopic switch turned to forward Battery voltage
Other than above 0
39 W Battery power supply - Battery voltage
40 B Ground (signal) - 0
41 Y Sensor ground - 0
42 G/W Tilt motor DOWNWARD signal Tilt switch turned to downward Battery voltage
Other than above 0
44 G Telescopic motor BACKWARD signal Telescopic switch turned to backward Battery voltage
Other than above 0
48 B Ground (power) - 0
(1) With A/T
(2) With M/T