LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Pathfinder LE, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Engine Control Systems) >> DTC P1226: TP Sensor >> DTC Confirmation Procedure >> Testing Condition:

Testing Condition:

WARNING: This page is about a different car, the 2004 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Before performing the following procedure, confirm that battery voltage is more than 10V at idle. 

WITH CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat steps 3 and 4 for 32 times.
  6. If 1st trip DTC is detected, go to Diagnostic Procedure  .

WITH GST 

Follow the procedure "WITH CONSULT-II" above.

scientia non olet · About LEMON Manuals