LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Pathfinder LE, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - VDC/TCS/Abs >> Trouble Diagnoses >> CONSULT-II Functions >> Data Monitor >> Operation Procedure

Operation Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on display.
  5. Touch "ABS" on display.
    NOTE: Just after starting engine, or turning ignition switch ON, "ABS" may not be displayed on system selection screen even if "START" is touched. In this case, start self-diagnosis again from step 2.
  6. Touch "DATA MONITOR".
  7. Return to monitor item selection screen, and touch any of "CONTROL UNIT INPUT ITEM", "MAIN ITEM" or "ITEM MENU SELECTION". Refer to Fig 1 .
  8. Touch "START".
  9. Screen of data monitor is displayed.
Fig 1: Identifying Display Item List (1 Of 2)
G00848195Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Identifying Display Item List (2 Of 2)
G00848196Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals