LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 403 (Engine Control System) >> DTC P1217: Engine Over Temperature >> Diagnostic Procedure >> 3. Check Cooling Fan Operation-II >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Select "TARGET FAN RPM" in "ACTIVE TEST" mode with CONSULT-II.
  2. Change "TRGT FAN RPM" indication by touching "UP" and "DOWN", then make sure that the cooling fan operating speed changes according to "TRGT FAN RPM" indication.
    Fig 1: Scan Tool Display - Active Test
    G00796373Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

  1. OK: GO TO 9. CHECK RADIATOR COOLANT TEMPERATURE SENSOR .
  2. NG: GO TO 5. CHECK GROUND CONNECTIONS .