Service Specifications
WARNING: This page is about a different car, the 2023 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Standard value | Limit | |
|---|---|---|---|
| TIMING CHAIN | |||
| Valve clearance mm (in) | Inlet | 0.22 ± 0.04 (0.009 ± 0.002) | - |
| Exhaust | 0.30 ± 0.04 (0.012 ± 0.002) | - | |
| CAMSHAFT | |||
| Cam height mm (in) | Inlet | 44.71 (1.760) | 44.21 (1.741) |
| Exhaust | 44.18 (1.739) | 43.68 (1.720) | |
| CYLINDER HEAD AND VALVES | |||
| Cylinder head bottom face grinding limit mm (in) | - | 0.2 (0.01) | |
| Cylinder head bottom face distortion mm (in) | 0.03 (0.001) or less | - | |
| Cylinder head overall height mm (in) | 112.9 - 113.1 (4.445 - 4.452) | - | |
| Valve margin mm (in) | Inlet | 0.85 (0.033) | 0.70 (0.028) |
| Exhaust | 1.5 (0.06) | 1.35 (0.053) | |
| Valve stem-to-guide clearance mm (in) | Inlet | 0.020 - 0.047 (0.0008 - 0.0018) | 0.10 (0.004) |
| Exhaust | 0.041 - 0.068 (0.0017 - 0.0026) | 0.15 (0.006) | |
| Valve length mm (in) | Inlet | 87.21 (3.433) | 86.71 (3.414) |
| Exhaust | 88.54 (3.486) | 88.04 (3.466) | |
| Valve spring free length mm (in) | 52.20 (2.055) | 51.20 (2.016) | |
| Valve spring out-of-squareness | 2° or less | 4° | |
| Valve seat contact width mm (in) | 1.1 - 1.5 (0.044 - 0.059) | - | |
| PISTON AND CONNECTING ROD | |||
| Piston outer diameter mm (in) | 75 (3.0) | - | |
| Piston ring to ring groove clearance mm (in) | No. 1 | 0.040 - 0.075 (0.0016 - 0.0029) | 0.1 (0.004) |
| No. 2 | 0.04 - 0.08 (0.002 - 0.003) | 0.1 (0.004) | |
| Piston ring end gap mm (in) | No. 1 | 0.25 - 0.30 (0.010 - 0.011) | 0.8 (0.03) |
| No. 2 | 0.40 - 0.55 (0.016 - 0.021) | 0.8 (0.03) | |
| Oil ring | 0.25 - 0.45 (0.010 - 0.017) | 1.0 (0.04) | |
| Crankshaft pin oil clearance mm (in) | 0.020 - 0.038 (0.0008 - 0.0014) | 0.1 (0.004) | |
| Outside diameter difference of connecting rod bolt mm (in) | 0 - 0.1 (0.000 - 0.003) | - | |
| Connecting rod big end thrust clearance mm (in) | 0.10 - 0.35 (0.004 - 0.013) | 0.4 (0.02) | |
| CRANKSHAFT AND CYLINDER BLOCK | |||
| Crankshaft bearing cap bolt shank length mm (in) | 88.5 - 89.5 (3.49 - 3.52) | - | |
| Crankshaft end play mm (in) | 0.09 - 0.27 (0.004 - 0.010) | 0.3 (0.01) | |
| Crankshaft journal oil clearance mm (in) | 0.014 - 0.034 (0.0006 - 0.0013) | 0.1 (0.004) | |
| Cylinder block top surface distortion mm (in) | 0.05 (0.002) | 0.1 (0.004) | |
| Cylinder block top face grinding limit (Total resurfacing depth of both cylinder head and cylinder block) mm (in) | - | 0.2 (0.01) | |
| Cylinder block overall height mm (in) | 279.59 (11.007) | - | |
| Cylinder bore mm (in) | 75 (3.0) | - | |
| Cylindrically mm (in) | 0.01 (0.0004) or less | - | |