Trouble Symptom Chart
WARNING: This page is about a different car, the 2023 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When you replace the camera-ECU, you should teach the camera-ECU for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ON-VEHICLE SERVICE ).
- When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ON-VEHICLE SERVICE ).
| Trouble symptom | Inspection Procedure No. |
|---|---|
| Check the camera-ECU power supply circuit. | 1 |
| No image is displayed. | 2 |
| Any of the camera images is blue. | 3 |
| The image is not switched when the selector lever is moved to the R position. | 4 |
| A screen is not switched when the vehicle speed reaches a predetermined value. | 5 |
| A camera image is displayed when the selector lever is moved to the R position, but it is not switched when the camera switch is pressed. | 6 |
| The color of vehicle icon cannot be changed and "x" mark is displayed on the vehicle icon. | 7 |