LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2021 >> Outlander PHEV LE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transaxle >> Rear Transaxle >> On-Vehicle Service >> Transaxle Fluid Change

Transaxle Fluid Change

  1. Remove the drain plug and gasket, to drain the fluid.
  2. Install the drain plug and new gasket, and tighten to the specified torque.

    Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb) 

    G12372026Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Remove the rear differential support weight B.
    G12372025Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Remove the filler plug and gasket, and fill the fluid up to the lower edge of the filler plug hole.

    Brand name: 

    MITSUBISHI MOTORS GENUINE ATF SP III 

    Quantity: 0.85 dm 3  (0.898 qt) 

  5. Install the filler plug and new gasket, and tighten to the specified torque.

    Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb) 

  6. Install the rear differential support weight B.
    G12372024Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 1: Rear Differential Support Weight B Bolts With Torque Specification
    G12372028Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals