LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2021 >> Outlander PHEV LE >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Diagnosis >> Data List Reference Table

Data List Reference Table

The following items can be read by the scan tool (M.U.T.-IIISE) from the electric parking brake ECU input data.

DATA LIST REFERENCE (SYSTEM IS NORMAL)

Item No. Check item Check condition Normal condition
1 Ignition switch Power supply mode of the electric motor switch: ON ON
Power supply mode of the electric motor switch: OFF OFF
2 EPB switch: LOCK 1 SW Turn on the power supply mode of the electric motor switch, and depress the brake pedal. Pull up the electric parking brake switch to apply the parking brake. ON
  • Do not operate the electric parking brake switch.
  • Push down the electric parking brake switch to release the parking brake.
 OFF
3 EPB switch: LOCK 2 SW Turn on the power supply mode of the electric motor switch, and depress the brake pedal. Pull up the electric parking brake switch to apply the parking brake. ON
  • Do not operate the electric parking brake switch.
  • Push down the electric parking brake switch to release the parking brake.
 OFF
4 EPB switch: RELEASE 1 SW Turn on the power supply mode of the electric motor switch, and depress the brake pedal. Push down the electric parking brake switch to release the parking brake. ON
  • Do not operate the electric parking brake switch.
  • Pull up the electric parking brake switch to apply the parking brake.
 OFF
5 EPB switch: RELEASE 2 SW Turn on the power supply mode of the electric motor switch, and depress the brake pedal. Push down the electric parking brake switch to release the parking brake. ON
  • Do not operate the electric parking brake switch.
  • Pull up the electric parking brake switch to apply the parking brake.
 OFF
7 Auto hold switch Brake auto hold switch: ON ON
Brake auto hold switch: OFF OFF
10 Right actuator +B line status Power supply mode of the electric motor switch is turned on. Open, Normal
13 Left actuator +B line status Power supply mode of the electric motor switch is turned on. Open, Normal
16 Right motor current (adjusted)
  • Power supply mode of the electric motor switch: ON
  • Electric parking brake: Release
 0 A
19 Left motor current (adjusted)
  • Power supply mode of the electric motor switch: ON
  • Electric parking brake: Release
 0 A
37 Right actuator status - Displays the electric parking brake actuator (RH) status.
38 Left actuator status - Displays the electric parking brake actuator (LH) status.
49 EPB active indicator The brake warning light is ON. ON
The brake warning light is OFF. OFF
50 EPB warning light The electric parking brake warning light is ON. ON
The electric parking brake warning light is OFF. OFF
51 EPB switch indicator The electric parking brake switch indicator is ON. ON
The electric parking brake switch indicator is OFF. OFF
52 FR wheel speed   Perform a test run of the vehicle. The speedometer display and the scan tool (M.U.T.-IIISE) display almost agree with each other.
53 FL wheel speed
54 RR wheel speed
55 RL wheel speed
56 Estimated vehicle speed Perform a test run of the vehicle. The speedometer display and the scan tool (M.U.T.-IIISE) display almost agree with each other.
57 Longitudinal G Vehicle stopped (level) -0.39 to 0.39 m/s2
Running -9.8 to 9.8 m/s2
58 Shift information Power supply mode of the electric motor switch: ON Selector lever position: P P
Selector lever position: R R
Selector lever position: N N
Selector lever position: D D
59 Engine torque (except PHEV) Not used.
60 Engine speed (except PHEV) Not used.
61 Motor torque (PHEV) The accelerator pedal is depressed with the electric motor running. Displays the motor torque.
62 PHEV-ECU operation mode (PHEV) Displayed which operation mode the PHEV-ECU is at. IG-OFF, Reset, High voltage ON, Torque control, High voltage OFF, Charge control, F-ROM writing
63 Accelerator pedal position The accelerator pedal is depressed with the electric motor running. Displays the accelerator pedal opening angle.
64 Master cylinder pressure sensor The brake pedal is depressed with the electric motor running. Displayed value changes in accordance with the brake pedal depression.
65 Driver's seat belt Seat belt (driver's side): Fastened Fastened
Seat belt (driver's side): Unfastened Not fastened
66 Ignition position information Not used.
67 Auto hold status
  • Power supply mode of the electric motor switch: ON
  • Brake auto hold switch: OFF
 OFF
  • Power supply mode of the electric motor switch: ON
  • Brake auto hold switch: ON
 Standby or Active
68 Auto hold switch indicator Brake auto hold switch indicator: ON ON
Brake auto hold switch indicator: OFF OFF
69 A.S.C. dynamic brake fail
  • Power supply mode of the electric motor switch: ON
  • Emergency brake (ASC): Enabled
 Normal
  • Power supply mode of the electric motor switch: ON
  • Emergency brake (ASC): Disabled
 Fail
70 Actuator fail A Power supply mode of the electric motor switch: ON Normal
71 Actuator fail B Power supply mode of the electric motor switch: ON Normal
77 Parking brake status The electric parking brake is OFF (being released). Release
The electric parking brake is ON (being applied). Lock
The maintenance mode is entered. Imperfect lock
The electric parking brake is applied. Release -> Lock
The electric parking brake is released. Lock -> Release
The electric parking brake ECU activates the emergency brake. EPB dynamic BRK
The ASC-ECU activates the emergency brake. ASC dynamic BRK
78 RR wheel actuator current
  • Power supply mode of the electric motor switch: ON
  • Electric parking brake: Release
 0 A
79 RL wheel actuator current
  • Power supply mode of the electric motor switch: ON
  • Electric parking brake: Release
 0 A
80 Coding counter - -
NOTE: While electric parking brake ECU is disabled by the diagnostic function, the scan tool (M.U.T.-IIISE) displayed data is different from the actual measurement.
scientia non olet · About LEMON Manuals