LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2013 >> Outlander ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Windshield Wiper System And Washer System) >> On-Vehicle Service >> Intelligent Washing Function Inspection

Intelligent Washing Function Inspection

WARNING: This page is about a different car, the 2012 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate the windshield washer switch for less than 0.35 second with the ignition switch in the ACC or ON position to check whether the intelligent washer function works normally.
  2. If not, carry out the troubleshooting. (Refer to INSPECTION PROCEDURE 11: THE INTELLIGENT WASHING FUNCTION DOES NOT WORK NORMALLY.  .
    NOTE: Check that the intelligent washer function is set to "Enabled" with the customization function. (Refer to CONFIGURATION FUNCTION  .
scientia non olet · About LEMON Manuals