Special Tools

Tool	Tool number and name	Supersession	Application
	MB991618 Hub bolt remover	General service tool	Removal of the hub bolt
	MB990767 Front hub and flange yoke holder	MB990767-01	Fixing of the hub
	MB991897 or MB992011 Ball joint remover	MB991113-01, MB990635-01 or General service tool	Knuckle and tie rod end ball joint disconnection NOTE: Steering linkage puller (MB990635 or MB991113)is also used to disconnect knuckle and tie rod end ball joint.
	MB990241 Axle shaft puller MB990242 Puller shaft MB990244 Puller bar	MB990241-01 or General service tool	Removal of the hub knuckle assembly Removal of the driveshaft assembly
	MB991354 Puller body	General service tool
	MB991056 or MB991355 Knuckle arm bridge	MB991056-01	Removal of the hub
	MB992250 Knuckle arm bridge attachment	-	Removal of the hub NOTE: Replace this attachment with a guide of MB991355 and use them.
	MB991017 MB990998 MB991000 A, B: Front hub remover and installer C: Spacer	MB990998-01	Removal of the hub Provisional holding of the wheel bearing Measurement of hub starting torque Measurement of wheel bearing end play NOTE: MB991000, which belongs to MB990998, should be used as a spacer. Removal of the wheel bearing inner race (outside) (Use MB991000 with MD998801.)
	MD998801 Remover	-	Removal of the wheel bearing inner race (outside)
	MB992150 Oil seal installer	-	Installation of the wheel bearing inner race (outside)
	MD998812 Installer cap	-
	MD998813 Installer	-
	MB990925 Bearing and oil seal installer set	MB990925-01 or General service tool	Removal of the wheel bearing
	MB990890 Rear suspension bushing base	MB990890-01	Installation of the wheel bearing
	MD999528 Adapter	-
	MB991388 Bush remover base	-	Installation of the dust shield
	MB991576 Base	-
	MB991099 Oil seal installer guide	-	Measurement of hub starting torque
	MB990326 Preload socket	General service tool
	MB991561 Boot band crimping tool	MB991561	BJ boot (resin boot) band installation

MB990925 BEARING AND OIL SEAL INSTALLER SET 

Tool	Type	Tool number	O D mm (in)
MB990925	A	MB990926	39.0 (1.54)
		MB990927	45.0 (1.77)
		MB990928	49.5 (1.95)
		MB990929	51.0 (2.00)
		MB990930	54.0 (2.13)
		MB990931	57.0 (2.24)
		MB990932	61.0 (2.40)
		MB990933	63.5 (2.50)
		MB990934	67.5 (2.66)
		MB990935	71.5 (2.81)
		MB990936	75.5 (2.97)
		MB990937	79.0 (3.11)
	B	MB990938	-
	C	MB990939	-