Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Brake line | |
| Brake tube flare nut | 15 +/- 2 N.m (12 +/- 1 ft-lb) |
| Brake pedal | |
| Brake booster nut | 13 +/- 2 N.m (104 +/- 25 in-lb) |
| Brake pedal bolt | 13 +/- 2 N.m (115 +/- 18 in-lb) |
| Front disc brake | |
| Brake hose connector bolt | 30 +/- 4 N.m (22 +/- 3 ft-lb) |
| Caliper bleeder | 7.9 +/- 1.9 N.m (70 +/- 16 in-lb) |
| Front brake assembly mounting bolt | 100 +/- 10 N.m (74 +/- 7 ft-lb) |
| Front brake bolt (guide pin bolt) | 38 +/- 4 N.m (28 +/- 3 ft-lb) |
| Front brake bolt (lock pin bolt) | 38 +/- 4 N.m (28 +/- 3 ft-lb) |
| Master cylinder assembly and brake booster | |
| Brake booster nut | 13 +/- 2 N.m (104 +/- 25 in-lb) |
| Brake fluid proportioning valve < Vehicles without ABS > | 30 +/- 5 N.m (22 +/- 4 ft-lb) |
| Brake master cylinder mounting nut | 22 +/- 5 N.m (17 +/- 4 ft-lb) |
| Rear disc brake | |
| Brake hose connector bolt | 30 +/- 4 N.m (22 +/- 3 ft-lb) |
| Caliper bleeder | 7.9 +/- 0.9 N.m (70 +/- 8 in-lb) |
| Rear brake assembly mounting bolt | 60 +/- 5 N.m (45 +/- 3 ft-lb) |
| Rear brake pin (guide pin bolt) | 44 +/- 5 N.m (32 +/- 4 ft-lb) |
| Rear brake pin (lock pin bolt) | 44 +/- 5 N.m (32 +/- 4 ft-lb) |