Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Caliper assembly bolt | 100 +/- 10 N.m (74 +/- 7 ft-lb) |
| Center bearing bracket bolt | 41 +/- 4 N.m (30 +/- 3 ft-lb) |
| Driveshaft nut | 245 +/- 29 N.m (181 +/- 21 ft-lb) |
| Front strut nut | 167 +/- 9 N.m (123 +/- 7 ft-lb) |
| Lower arm ball joint nut | 108 +/- 10 N.m (80 +/- 7 ft-lb) |
| Tie rod end nut | 25 +/- 5 N.m (19 +/- 3 ft-lb) |