Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Brake pedal height mm (in) | 150 -153 (5.9 -6.0) | - | |
| Brake pedal free play mm (in) | 3 -8 (0.12 -0.31) | - | |
| Brake pedal to floor board clearance mm (in) | 100 (3.9) or more | - | |
| Proportioning valve output fluid pressure MPa (psi) < Vehicles without ABS > | Split point | 3.68 -4.17 (533 -604) | - |
| When input fluid pressure is 7.84 MPa (1, 138 psi). | 4.66 -5.15 (676 -747) | - | |
| Proportioning valve output fluid pressure difference between left and right MPa (psi) | - | 0.5 (73) | |
| Front disc brake pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) | |
| Front disc brake disc thickness mm (in) | 24.0 (0.94) | Minimum 22.4 (0.88) | |
| Front disc brake disc run-out mm (in) | - | 0.04 (0.0015) | |
| Front disc brake drags force N (lb) | 68 (15) or less | - | |
| Rear disc brake pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) | |
| Rear disc brake disc thickness mm (in) | 10.0 (0.39) | Minimum 8.4 (0.33) | |
| Rear disc brake disc run-out mm (in) | - | 0.05 (0.0019) | |
| Rear disc brake drags force N (lb) | 68 (15) or less | - | |
| Front wheel bearing end play mm (in) | - | 0.05 (0.002) | |
| Rear wheel bearing end play mm (in) | - | 0.05 (0.002) | |
| Brake booster push rod protruding length mm (in) [When applying negative pressure of 66.7 kPa (19.7 inHg) to the brake booster] | 10.15 -10.40 (0.400 -0.409) | ||