Fastener Tightening Specification
FASTENER TIGHTENING SPECIFICATION
| ITEM | SPECIFICATION |
|---|---|
| Oil pan | |
| Oil pan mounting bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Transmission fluid dipstick guide mounting bolt (engine side) | 24 +/- 4 N.m (18 +/- 3 ft-lb) |
| Transmission fluid dipstick guide mounting bolt (transmission side) | 44 +/- 8 N.m (33 +/- 5 ft-lb) |
| Transmission mount center member assembly mounting bolt | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Transmission mount insulator assembly mounting nut | 26 +/- 4 N.m (19 +/- 3 ft-lb) |
| Powertrain control module (PCM) | |
| Powertrain control module (PCM) mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Powertrain control module (PCM) bracket mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Shift lock cable unit | |
| Shift lock cable unit mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Transfer | |
| Transfer oil filler plug | 32 +/- 2 N.m (24 +/- 1 ft-lb) |
| Transfer oil drain plug | 32 +/- 2 N.m (24 +/- 1 ft-lb) |
| Transfer-ECU | |
| Transfer-ECU mounting nut | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Transmission assembly | |
| Cover mounting bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Dynamic damper mounting bolt (left side) | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| Dynamic damper mounting bolt (right side) | 36 +/- 6 N.m (27 +/- 5 ft-lb) |
| Transmission fluid dipstick guide mounting bolt (engine side) | 24 +/- 4 N.m (18 +/- 3 ft-lb) |
| Transmission fluid dipstick guide mounting bolt (transmission side) | 44 +/- 8 N.m (33 +/- 5 ft-lb) |
| Oil cooler tube connecting eye bolt | 42 +/- 2 N.m (31 +/- 1 ft-lb) |
| Oil cooler tube mounting bolt (M6 bolt) | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Oil pan connection bolt | 36 +/- 5 N.m (26 +/- 4 ft-lb) |
| Starter motor and starter cover mounting bolt | 30 +/- 3 N.m (22 +/- 2 ft-lb) |
| Starter harness connection nut | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Tension wire mounting bolt | 24 +/- 5 N.m (18 +/- 3 ft-lb) |
| Tension wire bracket mounting bolt | 53 +/- 5 N.m (39 +/- 4 ft-lb) |
| Torque converter and drive plate connecting bolt | 49 +/- 3 N.m (36 +/- 2 ft-lb) |
| Transmission assembly upper part coupling bolt | 74 +/- 10 N.m (55 +/- 7 ft-lb) |
| Transmission assembly lower part coupling bolt | 89 +/- 9 N.m (66 +/- 6 ft-lb) |
| Transmission fluid drain plug | 39 +/- 5 N.m (29 +/- 3 ft-lb) |
| Transmission mount center member assembly mounting bolt | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Transmission mount insulator assembly mounting bolt | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Transmission mount insulator assembly mounting nut | 26 +/- 4 N.m (19 +/- 3 ft-lb) |
| Transmission control | |
| Bracket to selector lever assembly mounting bolt | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Detent plate assembly mounting bolt | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Detent spring mounting screw | 2.5 +/- 0.4 N.m (22 +/- 4 in-lb) |
| Lever assembly and universal joint connecting nut | 13 +/- 2 N.m (115 +/- 18 in-lb) |
| Selector lever assembly mounting bolt | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Shift lock cable unit mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Transfer shift lever bracket assembly mounting bolt | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Transfer shift lever switch mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Transmission control cable adjusting nut | 23 +/- 4 N.m (17 +/- 3 ft-lb) |
| Transmission control harness connecting bolt | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Transmission range switch adjusting nut | 23 +/- 4 N.m (17 +/- 3 ft-lb) |
| Transmission range switch mounting bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Transmission oil cooler | |
| Eye bolt | 42 +/- 2 N.m (31 +/- 1 ft-lb) |
| Transmission fluid return tube mounting bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Transmission oil cooler bracket mounting bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Transmission oil cooler tube assembly mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Transmission oil cooler tube bracket mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |