Fastener Tightening Specifications
WARNING: This page is about a different car, the 2006 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Drive shaft | |
| Castle nut | 200 +/- 10 N.m (148 +/- 7 ft-lb) |
| Drive shaft and inner shaft connection nut | 60 +/- 10 N.m (45 +/- 7 ft-lb) |
| Upper arm and upper arm ball joint connection nut | 25 +/- 4 N.m (18 +/- 3 ft-lb) |
| Differential carrier and Free wheeling clutch assembly | |
| Bearing cap bolt | 59 +/- 5 N.m (44 +/- 3 ft-lb) |
| Cover bolt | 18 +/- 3 N.m (13 +/- 2 ft-lb) |
| Differential case bolt | 83 +/- 5 N.m (62 +/- 3 ft-lb) |
| Differential carrier and propeller shaft connection bolt | 60 +/- 10 N.m (45 +/- 7 ft-lb) |
| Differential mount bracket bolt | 69 +/- 9 N.m (51 +/- 7 ft-lb) |
| Differential mount bracket < LH > and differential carrier connection bolt | 89 +/- 9 N.m (65 +/- 7 ft-lb) |
| Differential support bracket and differential carrier connection nut | 59 +/- 9 N.m (43 +/- 7 ft-lb) |
| Drain plug | 65 +/- 5 N.m (48 +/- 4 ft-lb) |
| Drive pinion self-locking nut | 216 +/- 29 N.m (159 +/- 22 ft-lb) |
| Filler plug | 50 +/- 10 N.m (37 +/- 7 ft-lb) |
| Freewheel engage switch assembly | 25 +/- 5 N.m (22 +/- 4 ft-lb) |
| Housing tube and freewheel clutch assembly connection bolt | 90 +/- 10 N.m (67 +/- 7 ft-lb) |
| No. 2 crossmember and front frame assembly connection nut | 128 +/- 9 N.m (94 +/- 7 ft-lb) |
| Front differential mount | |
| Differential mount bracket bolt | 69 +/- 9 N.m (51 +/- 7 ft-lb) |
| Differential mount bracket < REAR > bolt | 23 +/- 4 N.m (17 +/- 3 ft-lb) |
| Differential mount bracket < RH > and housing tube connection nut | 89 +/- 9 N.m (65 +/- 7 ft-lb) |
| Differential mount bracket < LH > and differential carrier connection bolt | 89 +/- 9 N.m (65 +/- 7 ft-lb) |
| Differential support bracket and differential carrier connection nut | 59 +/- 9 N.m (43 +/- 7 ft-lb) |
| Differential support bracket bolt | 69 +/- 9 N.m (51 +/- 7 ft-lb) |
| No. 2 crossmember and front frame assembly connection nut | 128 +/- 9 N.m (94 +/- 7 ft-lb) |
| Hub and knuckle assembly | |
| Brake disc and front hub assembly connection bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Castle nut | 200 +/- 10 N.m (148 +/- 7 ft-lb) |
| Disc brake assembly bolt | 113 +/- 10 N.m (83 +/- 7 ft-lb) |
| Dust cover and front hub assembly connection bolt | 8.9 +/- 1.9 N.m (79 +/- 17 in-lb) |
| Knuckle and front hub assembly connection bolt | 88 +/- 10 N.m (65 +/- 7 ft-lb) |
| Lower arm ball joint and knuckle connection nut | 147 +/- 29 N.m (109 +/- 21 ft-lb) |
| Tie rod end connection nut | 39 +/- 4 N.m (29 +/- 3 ft-lb) |
| Upper arm ball joint and knuckle connection nut | 74 +/- 14 N.m (55 +/- 3 ft-lb) |
| Inner shaft, Housing tube | |
| Actuator bolt | 17 +/- 3 N.m (13 +/- 2 ft-lb) |
| Breather pipe bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Differential mount bracket < RH > and housing tube connection nut | 89 +/- 9 N.m (65 +/- 7 ft-lb) |
| Differential mount bracket bolt | 69 +/- 9 N.m (51 +/- 7 ft-lb) |
| Free wheel engage switch assembly | 25 +/- 5 N.m (22 +/- 4 ft-lb) |
| Housing tube and differential carrier connection bolt | 90 +/- 10 N.m (67 +/- 7 ft-lb) |
| Vacuum tank bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Solenoid valve, Vacuum pipe | |
| Actuator bolt | 17 +/- 3 N.m (13 +/- 2 ft-lb) |
| Solenoid valve assembly bolt | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Vacuum pipe bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Vacuum tank bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |