Service Specifications
WARNING: This page is about a different car, the 2006 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | 36°30' +/- 1°30 | - | |
| Outside wheel (reference) | 31°40' | - | ||
| Tie rod end ball joint breakaway torque N.m (in-lb) | 0.49 - 2.45 (4.3 - 21.7) | - | ||
| Tie rod swing resistance N (lb) [N.m (in-lb)] | 11 - 35 (35.4 - 82.7) [1.4 - 4.9 (12.4 - 43.4)] |
- | ||
| Toe-in mm (in) | 2.5 +/- 2.5 (0.1 +/- 0.1) | - | ||
| Engine idle speed r/min | 1,000 +/- 100 | - | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] |
39.2 (8.8) or less [5.9 (1.33)] or less |
- | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.3 - 9.0 (1,209 - 1,305) | - | |
| Pressure under no-load conditions | 0.34(49.3) | - | ||
| Steering gear retention hydraulic pressure | 8.3 - 9.0 (1,209 - 1,305) | - | ||
| Oil pressure switch operating pressure MPa (psi) | OFF --> ON | 1.5 - 2.0 (217 - 290) | - | |
| ON --> OFF | 1.5 - 2.0 (217 - 290) | - | ||
| Gear box total pinion torque N.m (in-lb) [Change in torque: 0.4 N.m (3.5 in-lb) or less] |
0.6 - 1.7 (5.3 - 15.0) | - | ||
| Opening dimension of special tool MB991561 mm (in) | 2.9 (0.11) | - | ||
| Band crimped width mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | ||