LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Galant ES >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control >> On-Vehicle Service >> Auto-Cruise Control Switch Check >> Auto-Cruise Control Setting

Auto-Cruise Control Setting

  1. Switch "ON" the "CRUISE" (MAIN) switch.
  2. Drive at the desired speed, above approximately 40 km/h (25 mph).
  3. Push the auto-cruise control switch in the direction of the arrow.
  4. Check to be sure that when the switch is released the speed is the desired constant speed.
    NOTE: If the vehicle speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, it is normal for the auto- cruise control to be cancelled.
    Fig 1: Identifying Auto-Cruise Control Switch Direction
    G02394028Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals