LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1998 >> 3000GT Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Component Tests >> Throttle Position Sensor Test

Throttle Position Sensor Test

  1. Disconnect throttle position sensor harness connector. Check resistance between sensor terminals No. 1 and 4. Refer to the WIRING DIAGRAMS . Resistance should be 3.5-6.5 ohms.
  2. Connect an analog ohmmeter between sensor terminals No. 2 and 4. Operate throttle valve slowly from idle to wide open throttle. Resistance should change smoothly as throttle is opened and closed. Replace throttle position sensor as necessary.
scientia non olet · About LEMON Manuals