LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> Montero Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> System Input Testing >> 1991

System Input Testing: 1991

  1. System input tests should be performed if no trouble codes are stored when performing SELF-DIAGNOSTICS  .
  2. System input tests cycle each cruise control switch and sensor. Use analog voltmeter or Multi-Use Tester (MB991341) for system input check. Use multi-use tester according to operating instructions provided with tester. Connect leads of analog voltmeter between cruise control terminal and ground terminal of self-diagnostic connector. SeeFigure .
  3. Turn ignition on and check items No. 1-3 on INPUT CODE CHART. SeeFigure 0r 10. Start engine and check items No. 4 and 5 on INPUT CODE CHART. To display results of each input check, press SET switch while holding RESUME switch in ON position. Read codes. Codes will display if circuit tested is okay.
scientia non olet · About LEMON Manuals