LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1983 >> Starion Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> G-Sensor

Diagnosis & Testing: G-Sensor

  1. Ensure sensor is mounted correctly. Sensor must be within 1° of being level, if not, use shims to adjust to level.
    NOTE: If any oil leakage occurs with the sensor, replace it.
  2. Check voltage between "R" terminal of control unit and ground. If not 7.0-7.5 volts, control unit is faulty.
    CAUTION: Set voltmeter at correct range before measurement to prevent damage to control unit.
  3. Remove sensor and ground to car body using wire. Place sensor so manufacturer mark is upward. Measure voltage between "G" terminal and ground. If not 4.6-5.0 volts, replace sensor.
scientia non olet · About LEMON Manuals