LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2006 >> Montego Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Diagnosis And Testing >> Symptom Table >> Cap

Symptom Table: Cap

  1. Inspect the pressure relief cap and seals for damage or deterioration. Install a new pressure relief cap if necessary.
  2. Fit the pressure relief cap to the Radiator/Heater Core Pressure Tester Kit using the correct adapter.
  3. NOTE:  If the plunger of the pressure tester is depressed too fast, an incorrect pressure reading will result. Slowly pump the pressure tester until the pressure gauge stops increasing and note the highest pressure reading. Release the pressure and repeat the test. Install a new pressure relief cap if the pressure is not within specification. Refer to GENERAL SPECIFICATIONS   table.
scientia non olet · About LEMON Manuals