LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2003 >> Marauder >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (Automatic Transmission) >> In-Vehicle Repair >> Reverse Servo Assembly >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2003 Mercury Mountaineer and 2003 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage. If not damaged, the gasket should be reused.
  1. With the vehicle in PARK, position on a hoist.
  2. Remove the components in the order indicated in the following illustration and table.
  3. To install, reverse the removal procedure.
    Fig 1: Identifying Reverse Servo Assembly Components
    G01273488Courtesy of FORD MOTOR CO.
  4. Partially fill the transmission. For additional information, refer to TRANSMISSION FLUID DRAIN AND REFILL - WITHOUT TORQUE CONVERTER DRAIN PLUG .
scientia non olet · About LEMON Manuals