Door Glass Rear Channel
- Lower door glass.
- Remove lower door trim panel. See DOOR TRIM PANEL
under REMOVAL & INSTALLATION.
- Loosen two longitudinal adjustment bolts on rear channel adjuster. See Fig 1
.
- Raise and lower door glass, then tighten adjustment bolts to specification. See TORQUE SPECIFICATIONS
- Loosen lateral adjuster screw locknut and turn adjuster screw in or out to relieve any tension on door glass channel. Tighten locknut to specification. See TORQUE SPECIFICATIONS
.
- Raise and lower door glass to ensure it moves freely up and down.
- Install lower door trim panel See DOOR TRIM PANEL
under REMOVAL & INSTALLATION.
Courtesy of FORD MOTOR CO.