LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (Fuel Injection) >> Intake Air Temperature Sensor >> Removal

Intake Air Temperature Sensor: Removal

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Unplug the wiring harness connector at the intake air temperature sensor.
  3. Press together the sensor locking arms and remove the sensor from the charge air pipe (Fig 1 ).
    Fig 1: Locating Boost Pressure And Inlet Air Temperature Sensors
    G03567099Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals