LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Capri Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Power Steering Pump >> Reassembly

Power Steering Pump: Reassembly

  1. Install pressure switch and pressure regulator valve (if removed). Lubricate and install a NEW shaft oil seal. Install front bracket and bolts. Install pump shaft from front of body. Install rotor onto rear of shaft in same position as removed.
  2. Install shaft snap ring. Tap shaft on rear to seat snap ring onto rotor splined hole below rotor rear face. Install vanes in rotor with rounded edges facing out. Install cam ring, center pump body and front "O" ring. Install rear pump body and "O" ring.
  3. Install reservoir and "O" ring. Install short bolt into hole used by reservoir bracket. Install rear mount bracket. Rotate pulley to check for smooth operation.
scientia non olet · About LEMON Manuals