DTC Description
- Fault Memory & Actuation Of MIL After 2 consecutive driving cycles with fault.
- Frequency Of Testing Continuous.
- Checked Signal Or Status Limit values of pressure sensor signal (intake manifold absolute pressure).
- Order Of Magnitude Of Lower Limit Value At least 60 mbar if engine speed is more than 1300 RPM.
- Lower Limit Value Approximately zero is throttle valve angle is more than 80 degrees.
- Upper Limit Value Approximately 500-1200 mbar, dependent on performance of engine speed and throttle valve angle.
- Duration Of Test Approximately 5 seconds for each limit value.
- Test Conditions Disable time of approximately 30 seconds elapsed after starting.