LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Condenser Removal/Installation

Condenser Removal/Installation

  1. Using the retractable hardtop switch, keep the front roof half-open. (retractable hardtop)
    G13491622Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the wind blocker. (See WIND BLOCKER REMOVAL/INSTALLATION .)
  4. Partially peel back the side shelf (LH) and rear package trim to a position where the condenser is visible. (See SIDE SHELF REMOVAL/INSTALLATION .) (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
  5. Disconnect the connector.
    Fig 1: Condenser, Connector And Bolt With Torque Specification
    G13491623Courtesy of MAZDA MOTORS CORP.
  6. Remove the bolt.
  7. Remove the condenser.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals