Steering Angle Adjustment
WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the tie-rod end locknuts.
- Remove the steering gear boot clamp.
- Turn the tie rods.
Standard length L
8.6-21.6 mm {0.36-0.86 in}
- Turn the tie rods equally to provide the correct maximum steering angle.
- Tighten the tie-rod end locknuts.
Tightening torque
69-98 N±7m {7.1-9.9 kgf±7m, 51-72 ft±7lbf}
- Verify that the boot is not twisted, and install the boot clamp.
- Adjust the Toe-in after adjusting the steering angle. (See TOTAL TOE-IN ADJUSTMENT .)