LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 6 Touring, 2.5L Eng VIN 5, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Intake-Air System >> Intake-Air System Removal/Installation >> Intake Manifold Removal Note

Intake Manifold Removal Note

  1. Remove the MAP sensor/IAT sensor No. 2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO. 2 REMOVAL/INSTALLATION .)
  2. Disconnect the harness clip from the intake manifold as shown in the figure.
    Fig 1: Harness Clip Installation Position
    G09786768Courtesy of MAZDA MOTORS CORP.
  3. Remove the intake manifold.
scientia non olet · About LEMON Manuals