No. 3 Brake System Warning Light Remains Illuminated: Notes
NO. 3 BRAKE SYSTEM WARNING LIGHT REMAINS ILLUMINATED DETECTION CONDITIONS AND POSSIBLE CAUSES (DYNAMIC STABILITY CONTROL)
| 3 |
Brake system warning lights remains illuminated |
| POSSIBLE CAUSE |
- Brake fluid amount is low.
- Parking brake does not release.
- Parking brake switch or brake fluid level sensor stuck on.
- Short to ground in following circuit:
- Between parking brake switch and instrument cluster
- Between brake fluid level sensor and front body control module (FBCM)
- No connection at DSC HU/CM connector (When DSC HU/CM connector is removed, ABS warning light, brake system warning light, DSC indicator light, and DSC OFF indicator light are illuminated.)
- DSC HU/CM detected malfunction. (Input and output device malfunction)
- DSC HU/CM detects low voltage in power supply.
- DSC HU/CM ground malfunction (When DSC HU/CM ground is not securely connected, ABS warning light, brake system warning light, DSC indicator light, and DSC OFF indicator light are illuminated but DTCs are not display.)
- DSC HU/CM does not operate.
- Front body control module (FBCM) detected malfunction.
- DSC HU/CM internal malfunction
- Instrument cluster detected malfunction
|