LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 6 i Touring Plus >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System/Washer System >> Washer Fluid-Level Sensor Removal/Installation

Washer Fluid-Level Sensor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
  4. Remove in the order indicated in the table.
    Fig 1: Washer Fluid-Level Sensor And Grommet
    G08144913
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals