LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 543 (Lighting System) >> Auto Light/Wiper Control Module Inspection >> Notes

Auto Light/Wiper Control Module Inspection: Notes

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following parts:
    1. Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
    4. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    5. Passenger-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
  2. Remove the auto light/wiper control module with the connector connected. (See AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION .)
  3. Measure the voltage at the auto light/wiper control module terminals as indicated below.
scientia non olet · About LEMON Manuals