Kc6 Check The FPC Circuit For Correct Response
- Key in OFF position.
- Fuel Pump Control Module connector connected.
- Key ON, engine OFF.
- Measure the voltage between:
( + ) PCM Connector, Harness Side ( - ) FPC - Pin B56 Ground - Is the voltage greater than 10 V?
- Yes:
For DTC P025B, GO to KC7 .
For all others, GO to KC23 .
- No:
INSTALL a new Fuel Pump Control Module. REFER to the FUEL CHARGING AND CONTROLS -- HYBRID
.
CLEAR the DTCs. REPEAT the self-test.
- Yes:
For DTC P025B, GO to KC7 .