LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Lighting System) >> Back-Up Light Switch Removal/Installation

Back-Up Light Switch Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] ).
  2. Disconnect the negative battery cable.
  3. Remove the under cover.
  4. Drain the oil.(See TRANSAXLE OIL REPLACEMENT [G35M-R] ).
  5. Disconnect the back-up light switch connector and remove the back-up light switch.
  6. Install in the reverse order of removal.
  7. Refill the oil.(See TRANSAXLE OIL REPLACEMENT [G35M-R] ).
    Fig 1: Identifying Double-Sided Adhesive Tape To Cover
    G05545893Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals