LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Air Bag System) >> Disposal Procedures >> Inspecting Deployment Tool

Inspecting Deployment Tool

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Deployment Tool (49 H066 002) should always be inspected for proper operation before deploying air bag.
  1. Connect Red deployment tool clip to positive battery terminal. Connect Black deployment tool clip to negative battery terminal. Observe deployment tool lights. Green light should be on and Red light should be off.
  2. Connect deployment tool connector "A" to connector "B". See Fig 1. Green light should be off and Red light should be on. Press deployment tool activation switch. Green light should be on and Red light should be off.
  3. If deployment tool lights function as described, it is safe to use deployment tool to activate air bag. If deployment tool lights do not function as described, DO NOT use deployment tool. Replace deployment tool with another unit and repeat procedure.
Fig 1: Identifying Air Bag Deployment Tool Connectors
G98A13839Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals