LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1995 >> B3000 Base, Automatic >> Repair and Diagnosis >> Transmission >> Manual Trans >> Removal & Installation - M/T >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS TABLE (1)

Application Ft. Lbs. (N.m)
B2300, B3000 & B4000
Clutch Housing-To-Engine Bolts 28-38 (38-51)
Starter Bolts 15-20 (21-27)
Miata
Clutch Housing-To-Engine Block Bolts 47-66 (64-90)
Drive Shaft Bolts 20-22 (27-30)
PPF-To-Differential Mounting Spacer Bolt (Short) 27-38 (37-52)
PPF-To-Differential Side Mounting Bolts (Long) 77-91 (104-123)
PPF-To-PPF Bracket Bolt 27-40 (37-54)
PPF-To-Transmission Side Mounting Bolts (Long) 77-91 (104-123)
Transmission-To-PPF Bracket Bolts 27-40 (37-54)
Starter Bolts 27-38 (37-52)
MX-3, MX-6, Protege & 626
Axle Shaft Nut 174-235 (235-319)
Control Rod-To-Transaxle Bolt 12-17 (16-23)
Extension Bar-To-Bracket Bolt 23-34 (31-46)
Lower Ball Joint Pinch Bolt 32-43 (44-58)
Release Cylinder-To-Transaxle Bolt 12-17 (16-23)
Stabilizer Bracket-To-Body Bolt 23-33 (31-45)
Starter Mounting Bolt 27-38 (37-52)
Stopper Bolt Lock Nut 10-13 (14-18)
Transaxle-To-Engine Bolt
MX-6 & 626 66-86 (90-117)
Protege 47-66 (64-90)
Wheel Lug Nuts 65-87 (88-118)
RX7
Clutch Housing-To-Engine Bolts 28-38 (38-52)
Tunnel Reinforcement 13-19 (18-26)
(1) Tighten in sequence.