Resistance Test

Check resistance between specified terminals of actuator connector. See ACTUATOR RESISTANCE SPECIFICATIONS table. See Fig 1 and Fig 2 . If resistance is not as specified, replace actuator. If resistance is as specified, perform FUNCTION TEST.

ACTUATOR RESISTANCE SPECIFICATIONS

Application

⁽¹⁾ Ohms

2.0L A/T

Between Terminals

"A" & "C"

"A" & "B"

2.0L M/T & 2.5L

Between Terminals

"B" & "A"

"B" & "C"

"B" & "D"

⁽¹⁾	Values are approximate.

Fig 1: Actuator Connector Terminal ID (MX-6 2.0L A/T)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Actuator Connector Terminal ID (MX-6 2.0L M/T & 2.5L)

Courtesy of MAZDA MOTORS CORP.