LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 323 Base, 2D Hatchback >> Repair and Diagnosis >> Electrical >> Starter >> Starter - Direct Drive >> Cranking Test Specifications >> Bench Tests >> Commutator

Bench Tests: Commutator

  1. Clean surface and polish with No. 400 sandpaper if required. If surface is scored, out of round or pitted, turn commutator in a lathe.
  2. Maximum commutator runout and minimum diameter of commutator must not exceed specification after turning.
scientia non olet · About LEMON Manuals