Seat Track: Installation

Passenger seat with fold-flat backrest 

• 1.
  
  Make sure the fold-flat recliner cable is routed correctly between the power seat track cross tube and cushion frame.

Courtesy of FORD MOTOR COMPANY

All seats 

• 2.
  
  Install the 4 seat track-to-cushion frame bolts.
  • Tighten to 23 Nm (17 lb-ft).

All passenger seats 

• 3.
  
  For correct front passenger seat cushion wire harness routing, refer to Seat Wire Harness Routing - Front Passenger Cushion .

• 4.
  
  Connect the OCS weight sensor bolt electrical connectors and attach any retainers holding the wire harness to the seat track.

• 5.
  
  Connect the OCSM and attach any wire harness retainers to the seat track.

Passenger seat with power seat track 

• 6.
  
  If equipped, connect the DCSM electrical connectors and attach any retainers holding the wire harness to the seat track.

Driver seat 

• 7.
  
  If equipped, connect the DSM electrical connectors and attach any retainers holding the wire harness to the seat track.

• 8.
  
  Connect the seat track position sensor and attach any retainers holding the wire harness or electrical connectors to the seat track.

All seats 

• 9.
  
  For a power seat, connect all the seat track motor electrical connectors and attach any retainers holding the wire harness or electrical connectors to the seat track.

• 10.
  
  Connect the safety belt buckle switch electrical connector. Attach any retainers holding the wire harness or electrical connector to the seat track.

• 11.
  
  Attach the seat wire harness main feed in electrical connector(s) to the seat track brackets.

• 12.
  
  Install the front seat backrest. Refer to Seat Backrest - Front .

Driver seat with memory 

• 13.
  
  Set the memory seat soft stops. Refer to Setting the Soft Stops in the Principles of Operation portion of Seating .