LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKX AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Battery, Mounting And Cables) >> Removal And Installation >> Generator Current Sensor >> Removal

Generator Current Sensor: Removal

  1. Disconnect the battery. For additional information, refer to BATTERY DISCONNECT 
  2. Remove the nut and position the positive battery cable terminal aside.
  3. Disconnect the generator current sensor electrical connector.
  4. Index-mark the battery cable at the generator current sensor. Remove and discard the tape securing the generator current sensor to the battery cable and remove the generator current sensor.
    NOTE: Note the orientation and position of the generator current sensor tape tab.
scientia non olet · About LEMON Manuals