LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> Town Car Executive, 4.6 W >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control System >> Removal & Installation >> Accelerator Pedal and Bracket >> Installation

Accelerator Pedal and Bracket: Installation

  1. Install the accelerator pedal and bracket assembly.
  2. Install the 3 accelerator pedal and bracket retaining nuts.
    • Tighten to 9 Nm (80 lb-in).
  3. Connect the accelerator pedal motor drive cable connector.
  4. Connect the accelerator pedal motor electrical connector.
  5. Connect the accelerator pedal sensor electrical connector.
  6. Carry out the adjustable pedal indexing procedure. For additional information, refer to HYDRAULIC BRAKE ACTUATION article.
scientia non olet · About LEMON Manuals