Power Steering Fluid Cooler: Installation

Install the power steering fluid cooler and the 2 bolts.
- Tighten to 10 Nm (89 lb-in).
Install the hose clamp and the upper transmission cooler line.
Install the hose clamp and the lower transmission cooler line.
Install the hose clamp and the cooler-to-reservoir return hose.
Install the hose clamp and the steering gear-to-cooler hose.
Using the special tool, tighten the 4 hose clamps.

Fig 1: Identifying Hose Clamp And Special Tool (205-343)
Courtesy of FORD MOTOR CO.
Fill the power steering system. For additional information, refer to STEERING SYSTEM-GENERAL INFORMATION .