LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> Navigator 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Control >> Removal And Installation >> Wheel Speed Sensor - Rear >> Removal and Installation

Removal and Installation

  1. Remove the parking brake shoes. For additional information, refer to PARKING BRAKE & ACTUATION .
  2. Disconnect the wheel speed sensor wire from the retaining clips.
    Fig 1: Disconnecting Wheel Speed Sensor Wire From Retaining Clips
    G03928870Courtesy of FORD MOTOR CO.
  3. Remove the bolt and the rear wheel speed sensor.
    Fig 2: Removing Rear Wheel Speed Sensor Bolt
    G03928871Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.