Diagnosis & Testing
Before performing individual component or system tests, check following for possible cause of system malfunction:
- Tire Pressure
- Mechanical Condition Of Steering
- Power Steering Fluid Level
- Pump Pressure
- Faulty Fuse No. 28 In Fuse Junction Box
- Faulty Fuse No. 4 or 11 In Power Distribution Box
- Loose Or Corroded Connectors
- Damaged Wiring
If problem remains after inspection, connect and operate New Generation Star (NGS) Tester (007-00500) following manufacturer's instructions. Perform data link diagnostics test. See DATA LINK DIAGNOSTIC TEST for 2000 models or DATA LINK DIAGNOSTIC TEST for 2001 models. If scan tool displays CKT 914, CKT 915 or CKT70 - NO RESPONSE/NOT EQUIPPED for vehicle dynamics module, go to TEST A .
If vehicle dynamics module passes data link diagnostics test, retrieve and record continuous Diagnostic Trouble Codes (DTCs) and perform on-demand self test vehicle dynamics module to retrieve current DTCs. See VAPS STEERING DIAGNOSTIC TROUBLE CODE DEFINITIONS table. If no DTCs are displayed, go to SYMPTOM TESTS .
| DTC | Description |
|---|---|
| B1317 | High Voltage Detected |
| B1318 | Low Voltage Detected |
| B1342 | Vehicle Dynamics Module Defective |
| C1897 | VAPSIII Circuit Failure |