Test E: Warning Indicator Flickers Or Is Intermittent
- Inspect all generator and battery connections. Clean and tighten loose connections. If connections are okay, go to next step.
- Start engine. With engine running, inspect battery junction box fuse No. 2 (20-amp) and central junction box fuse No. 5 (10-amp) by wiggling fuses and noting warning indicator. If warning indicator flickers, repair loose fuse connection(s). Retest system operation. If warning indicator does not flicker, go to next step.
- Turn ignition off. Connect a fused (15-amp) jumper wire to positive battery terminal, and backprobe generator connector terminal "A". Start engine. With engine running, observe warning indicator. If warning indicator flickers, replace generator. See GENERATOR under REMOVAL & INSTALLATION. If warning indicator does not flicker, repair loose connection(s) in circuits. Retest system operation.