LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1996 >> Continental >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis >> Test L: Traction Control Off Switch

Test L: Traction Control Off Switch

  1. Check Traction Control Switch

    Turn ignition off. Disconnect 28-pin connector from ABCM. ABCM is located below HCU. Connect Breakout Box (014-00322) and ABS Adapter (007-00116) to ABCM wiring harness connector. Turn ignition on. Do not press traction control off switch. Using DVOM, check voltage between breakout box pins No. 13 and 18. If battery voltage exists, go to step 6). If battery voltage does not exist, go to next step.
  2. Leave ignition on. Press traction control off switch. Check voltage between breakout box pins No. 13 and 18. If battery voltage exists, system is okay. Testing is complete. If battery voltage does not exist, go to next step.
  3. Leave ignition on. Check for battery voltage at traction control switch socket. If battery voltage exists, go to next step. If battery voltage does not exist, check fuse No. 5. If fuse is okay, repair circuit No. 640 (Red/Yellow wire).
  4. Using DVOM, check continuity between switch terminals when switch is pressed. If continuity exists, go to next step. If continuity does not exist, replace traction control off switch.
  5. Check continuity between switch Gray wire terminal and breakout box pin No. 18. If continuity exists, go to next step. If continuity does not exist, repair circuit No. 959 (Gray wire).
  6. Check continuity between terminals when switch IS NOT pressed. If continuity exists, replace traction control off switch. If continuity does not exist, replace traction control off switch.
scientia non olet · About LEMON Manuals