LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> SC 430 >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control (Service Information) >> Rear Speed Sensor >> Removal >> Removal

Rear Speed Sensor: Removal: Removal

  1. REMOVE REAR WHEEL 
  2. REMOVE REAR SEAT CUSHION ASSEMBLY  . Refer to REMOVAL - Step 1
  3. REMOVE REAR SEAT HEADREST PLATE COVER  . Refer to REMOVAL - Step 2
  4. REMOVE WIND DEFLECTOR BOARD ASSEMBLY  . Refer to REMOVAL - Step 3
  5. REMOVE REAR SEAT HEADREST PLATE  . Refer to REMOVAL - Step 4
  6. REMOVE REAR SEAT HEADREST ASSEMBLY  . Refer to REMOVAL - Step 5
  7. REMOVE REAR SEATBACK ASSEMBLY  . Refer to REMOVAL - Step 6
  8. REMOVE REAR SPEED SENSOR LH 
    1. Disconnect the sensor and height control sensor connectors.
    2. Remove the bolt and nut, and then disconnect the No. 2 and No. 3 clamps.
    3. Remove the resin clamp and clamp bolt, and then disconnect the height control sensor connector.
    4. Remove the bolt, and then disconnect the No. 1 clamp.
    5. Remove the bolt and sensor.
      Fig 1: Identifying Bolt And Sensor
      GTY121440Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Keep the sensor tip free from foreign matter.

  9. REMOVE REAR SPEED SENSOR RH 
    1. Disconnect the sensor connector.
    2. Remove the nut, and then disconnect the No. 2 clamp.
    3. Remove the bolt and sensor.
      Fig 2: Identifying Bolt And Sensor
      GTY127731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Keep the sensor tip free from foreign matter.

scientia non olet · About LEMON Manuals