Data List / Active Test

HINT:

Using the Techstream's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Turn the power switch OFF.
2. Connect Techstream to the DLC3.
3. Turn the power switch ON (IG) and turn the tester ON.
4. Check the values by referring to the table below.

   Active stabilizer control ECU 

   NORMAL CONDITION CHART
   
   

   Tester Display	Measurement Item/ Range	Normal Condition	Reference Value	Diagnostic Note
   Vehicle Speed	Vehicle speed/ Min.: 0 km/h (0 mph) Max.: 300 km/h (187 mph)	Vehicle is stopped	0 km/h	-
   		Vehicle is driven at constant speed	Value does not vary significantly	-
   FR Wheel Speed	Front RH wheel speed/ Min.: 0 km/h (0 mph) Max.: 655.35 km/h (409.5 mph)	Vehicle is stopped	0 km/h	-
   		Vehicle is driven at constant speed	Value does not vary significantly	-
   FL Wheel Speed	Front LH wheel speed/ Min.: 0 km/h (0 mph) Max.: 655.35 km/h (409.5 mph)	Vehicle is stopped	0 km/h	-
   		Vehicle is driven at constant speed	Value does not vary significantly	-
   RR Wheel Speed	Rear RH wheel speed/ Min.: 0 km/h (0 mph) Max.: 655.35 km/h (409.5 mph)	Vehicle is stopped	0 km/h	-
   		Vehicle is driven at constant speed	Value does not vary significantly	-
   RL Wheel Speed	Rear LH wheel speed/ Min.: 0 km/h (0 mph) Max.: 655.35 km/h (409.5 mph)	Vehicle is stopped	0 km/h	-
   		Vehicle is driven at constant speed	Value does not vary significantly	-
   IG Power Supply	ECU power voltage condition (IG)/ Min.: 0 V Max.: 19.979 V	Power switch ON (IG)	10 to 14 V	-
   PIG Power Supply	ECU power voltage condition (PIG)/ Min.: 0 V Max.: 19.979 V	Power switch ON (IG)	10 to 14 V	-
   Steering Angle	Steering angle (turning to left is positive)/ Min.: -3072° Max.: 3070.5°	Move steering wheel to neutral point	Close to 0	-
   		Rotate steering wheel	Continuously varies	-
   Yaw Rate Sensor 1	Yaw rate value/ Min.:-1.7425°red/s Max.: 1.73825°red/s	Vehicle is stopped	0°red/s	-
   		Vehicle is turned	0 to-1.7425°red/s	-
   		Vehicle is turned	0 to 1.73825° red/s	-
   Yaw Rate Sensor 2	Yaw rate value/ Min.: -1.7425°red/s Max.: 1.73825°red/s	Vehicle is stopped	0°red/s	-
   		Vehicle is turned	0 to -1.7425° red/s	-
   		Vehicle is turned	0 to 1.73825° red/s	-
   Right And Left G	Right and left G/ Min.:-321.45408 m/s2 Max.: 321.44427 m/s2	Vehicle is accelerated or decelerated	Continuously varies	-
   Back And Forth G	Front and rear G/ Min.: -321.45408 m/s2 Max.: 321.44427 m/s2	Vehicle is accelerated or decelerated	Continuously varies	-
   Engine Speed	Engine rpm/ Min.: 0 rpm Max.: 12800 rpm	Vehicle is stopped	0 rpm	-
   		Engine is running at constant speed	Value does not vary significantly	-
   Fr Twist Angle	Front stabilizer twist angle/ Min.: -2457.6° Max.: 2457.525°	Vehicle is stopped on level surface	Approximately 0	-
   		During roll control	Continuously varies	-
   Rr Twist Angle	Rear stabilizer twist angle/ Min.: -2457.6° Max.: 2457.525°	Vehicle is stopped on level surface	Approximately 0	-
   		During roll control	Continuously varies	-
   Fr Target Torq	Front control target torque value/ Min.: -3276.8 N*m Max.: 3276.7 N*m	-	-	-
   Rr Target Torq	Rear control target torque value/ Min.: -3276.8 N*m Max.: 3276.7 N*m	-	-	-
   Number of DTC	Number of diagnosis codes Min.: 0 Max.: 255	-	Displays DTCs being output	-